壓配機
壓配機是用于小線輪輻和輪輞的裝配，將輪輻壓入輪輞內，并可根據需要手動設置輪輻輪輞之間的偏距值，定位準確，為輪輻和輪輞的焊接后的跳動提供保證。整機采用四柱式結構，能夠保證壓配時機身保持較好的剛性，提高了輪輻與輪輞壓配時的同心度。
概述
Summary
壓配機是用于小線輪輻和輪輞的裝配，將輪輻壓入輪輞內，并可根據需要手動設置輪輻輪輞之間的偏距值，定位準確，為輪輻和輪輞的焊接后的跳動提供保證。整機采用四柱式結構，能夠保證壓配時機身保持較好的剛性，提高了輪輻與輪輞壓配時的同心度。
Press-fitting machine is used for assembly of small size disc and rim. It can press disc into rim precisely and can manually adjust offset distance between disc and rim. It also can locate accurately, which can guarantee disc and rims run-out after welding. The whole equipment adopts four-pillar structure, which can guarantee the machine body to keep its rigidity during assembly and can provide their concentricity.
The press-fitting machine is composed of pre-pressing cylinder, pull rod, sliding block, base seat, main oil cylinder and necessary molds.
設備型號 | Model Number | Номер модели | YPJ-400-AH |
電網電壓 | Power Supply | Мощность | AC 380V±10%, 3phase, 50Hz |
壓配力 | Press-Fitting Force | Сила сжатия при сборке | 320KN |
壓縮空氣 | Pressure of Compressed Air | Давление сжатого воздуха | 0.4 ~ 0.6Mpa |
工作臺行程 | Travel of Working Table | Ход рабочего стола | 300mm |
加工輪輞范圍 | Processing Range of Rim | Диапазон размеров обода | 12 inches ~ 18 inches |
工作臺面積 | Working Table Size | Размер рабочего стола | 900mm x 900mm |
? 2018 山東小鴨精工機械有限公司 版權所有|魯ICP備11005049號-1
歡迎掃碼咨詢合作
400-6586-222轉8